The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Simulators >> Circuit Simulators >> Plotting s-parameter from Cadence icfb https://designers-guide.org/forum/YaBB.pl?num=1150756199 Message started by msl on Jun 19th, 2006, 3:29pm |
Title: Plotting s-parameter from Cadence icfb Post by msl on Jun 19th, 2006, 3:29pm Hi all, I have done the sp simulation with the Analog Design Envionment in icfb. I could display the s-parameter table after simulation by selecting "Results->Print->S-Parameter->2 port". According to a tutorial I'm using, I should be able to plot the s parameters by first clicking on "Tools->Waveform ...", then cloosing "Results->Plot-SP" to display the S-Parameters Results window. But on my Analog Design Envionment window, I do not have the "Results->Plot-SP" selection. Does anyone know what the problem is? Or, if I don't have the license for that function? Thanks in advance! |
Title: Re: Plotting s-parameter from Cadence icfb Post by Andrew Beckett on Jul 20th, 2006, 1:53pm Do you have a Results->Direct Plot->Main Form menu? This has been there since IC50, and is the usual way to plot s-parameter (and many other simulation results). Otherwise, please state which version you're using - then we can give you more directed advice. Regards, Andrew. |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |