The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Simulators >> Circuit Simulators >> How to save ADE state as view (like schematic ) https://designers-guide.org/forum/YaBB.pl?num=1150819318 Message started by rfx on Jun 20th, 2006, 9:01am |
Title: How to save ADE state as view (like schematic ) Post by rfx on Jun 20th, 2006, 9:01am Hi, How I can save Analog Artist Enviroment state (model setup, output setup,etc) as as view like schematic? What version of cadence I need to use (icf5033 or icfb 5104 etc.)? Thanks, rfx |
Title: Re: How to save ADE state as view (like schematic Post by bernd on Jun 21st, 2006, 1:43am It's possible from 5.1.41 USR3 (sub-version 5.12.41_USR3.27.30) onwards. Bernd |
Title: Re: How to save ADE state as view (like schematic Post by achim.graupner on Jun 21st, 2006, 4:33am Hi Bernd, ... and how?? achim |
Title: Re: How to save ADE state as view (like schematic Post by bernd on Jun 21st, 2006, 4:57am Like you are used to do ADE -> Session -> Save State... There is a new GUI then which gives the possibility to save the State as Cellview. Bernd |
Title: Re: How to save ADE state as view (like schematic Post by rfx on Jun 21st, 2006, 11:33am Thanks Bernd, Yes, it does work after using the version mentioned. You have option to save as either conventianal way or as cell view. rfx |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |