The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Design Languages >> VHDL-AMS >> save vhdl ams quantity values in cadence virtuoso? https://designers-guide.org/forum/YaBB.pl?num=1152057840 Message started by paula on Jul 4th, 2006, 5:04pm |
Title: save vhdl ams quantity values in cadence virtuoso? Post by paula on Jul 4th, 2006, 5:04pm [url][/url] :( can somebody please tell me how to save values of quantites into a file for post processing. I am using cadence virtuoso simulator for VHDL-AMS. Data can be exported and saved into csv format if one goes through the GUI, but is there an alternative so that I dont have to go through the GUI and save the results in csv format into a file ? Also if this is not possible, can I write the value of quantities into a file while simulation along with the simulation time "now" ? If so how ? If it is a branch quantity, how do I write it and if it is declared as a port how do I mention the terminals it needs to be connected between and then write it to a file? Please help me with this. It is very important for me to know how to do this in order to carry on with my Thesis. Thanks in advance. Paula. |
Title: Re: save vhdl ams quantity values in cadence virtu Post by Paul on Jul 5th, 2006, 1:07pm Hi, you can use the textio package to read/write text files. Descriptions are available on multiple locations on the web: http://www.eng.auburn.edu/department/ee/mgc/vhdl.html#textio http://lsm.epfl.ch/webdav/site/lsm/users/104020/public/VHDL_instant_v2.1.pdf http://www.amontec.com/fix/vhdl_memo/ Writing multiple variables to a single line is illustrated here: http://www.vhdl.org/comp.lang.vhdl/FAQ1.html#text_files Good luck Paul |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |