The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Simulators >> Circuit Simulators >> Your Comments for EDN Magazine https://designers-guide.org/forum/YaBB.pl?num=1154482452 Message started by loose-electron on Aug 1st, 2006, 6:34pm |
Title: Your Comments for EDN Magazine Post by loose-electron on Aug 1st, 2006, 6:34pm Hi All - I do freelance writing for the electronics magazines. If you google me "Jerry Twomey" you will find my articles in Electronic Design, EDN and Chip Design. Anyhow, EDN has retained me to write an article on simulators, a comparison of EDA tools, with the bent towards the analog and mixed signal side. I am seeking comments and user experieinces from people who have designed on Cadence, Mentor Graphics, Tanner, Synopsys, Simucad/Silvaco, or any of the other major EDA vendors tool sets. Please tell me about your user experiences, support issues, known problems, etc. etc. All information treated as confidential of course. This is an opportunity to get heard in the industry's largest electronics magazine. All comments are welcome thanks, Jerry Twomey jerry@effectiveelectrons.com |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |