The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Other CAD Tools >> Entry Tools >> LVS Parameters for Presistors, Sources, etc. https://designers-guide.org/forum/YaBB.pl?num=1154800338 Message started by keplin on Aug 5th, 2006, 10:52am |
Title: LVS Parameters for Presistors, Sources, etc. Post by keplin on Aug 5th, 2006, 10:52am Does anyone know what additional LVS Parameters are needed besides "lvsIgnore" in the CDF for the following devices to be included in schematics and still be LVS clean? 1) Presistor - Shorted in Layout 2) Presistor - Open in Layout 3) vdc - Shorted in Layout 4) idc - Open in Layout |
Title: Re: LVS Parameters for Presistors, Sources, etc. Post by keplin on Aug 5th, 2006, 11:57am Oh, I found the parameter "lxRemoveDevice" which takes the string argument of either "short(PLUS MINUS)" or "open(PLUS MINUS)" This property should be used in conjunction with "lvsIgnore" These parameters should be added to CDF of the device. The details are covered in SourceLink topic #11027954 |
Title: Re: LVS Parameters for Presistors, Sources, etc. Post by bernd on Aug 7th, 2006, 12:37am About which LVS tool do you talk? Bernd |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |