The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Simulators >> Circuit Simulators >> How to access transistor's w and l in skill https://designers-guide.org/forum/YaBB.pl?num=1156891244 Message started by jimmy on Aug 29th, 2006, 3:40pm |
Title: How to access transistor's w and l in skill Post by jimmy on Aug 29th, 2006, 3:40pm Hi, I am wondering how to access a transistor's w and l in skill code. I can get its gm, gds, vth, etc. by using something like gm = OP(M1 "gm") or model parameters using for example tox=MP(M2 "tox"), but I don't know how to get their w and l. Thank you for your help, jimmy |
Title: Re: How to access transistor's w and l in skill Post by jbdavid on Aug 30th, 2006, 12:20am gm is an Output Parameter.. hence OP() w and l are Instance Parameters.. - IP()?? What I do is open the calculator and look for something I don't know off the top of my head.. and look that up in the manual.. or look in the ocean manual.. or the results browser.. find one, plot it to the calculator and I can see the OCEAN(skill subset) command to use there.. Since I don't have a session up right now.. I can't tell you for sure.. Jbd |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |