The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Design >> RF Design >> Transmission line..
https://designers-guide.org/forum/YaBB.pl?num=1156928403

Message started by ramana_akula on Aug 30^th, 2006, 2:00am

Title: Transmission line..
Post by ramana_akula on Aug 30^th, 2006, 2:00am

Hi All..
just i wanna to know d meaning of following parameters in spice & i was unable to find same kind of parameters in spectre..

In Spice : plev=3
elev=3
dlev=2

Can any one help me out, in conveting these parameters into spectre format....

My actual Spice statments are like this
--------------
.MODEL tx_rlc W plev=3 elev=3 dlev=2 MODELTYPE=RLGC N=1 L0=613n C0=56p R0=93.8m G0=0.1p Rs=0.48m GD=1p

WT_line in1 in2 out1 out2 tx_rlc L=100m
-------------

I need to convet these statements into spectre.. Help me..

Thanks,
Ramana Akula...