The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Design >> Analog Design >> common mode input of swit-cap amplifier https://designers-guide.org/forum/YaBB.pl?num=1169052053 Message started by vhdl00 on Jan 17th, 2007, 8:40am |
Title: common mode input of swit-cap amplifier Post by vhdl00 on Jan 17th, 2007, 8:40am Please see the attached circuit. I was struglling to set up the common mode input dc level of switcap gain circuit. Most of the cuitcuit analysis just give the ac analysis. I intended to set up the bias through M1 and M3, but it doesn't work. any suggestions? Thanks |
Title: Re: common mode input of swit-cap amplifier Post by wuyuchun on Jan 18th, 2007, 9:56pm I guess the voltage at c,d and the input and output common voltage are not the same as the voltage at a,b.If so,the results are reasonable. |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |