The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Design >> Analog Design >> My Doubt in LDO https://designers-guide.org/forum/YaBB.pl?num=1170439393 Message started by shankar_p on Feb 2nd, 2007, 10:03am |
Title: My Doubt in LDO Post by shankar_p on Feb 2nd, 2007, 10:03am I am designing an LDO to produce a regulated 1.8V from an unregulated 3V supply with 50 mA as max current. For this the W/L of the Mosfet turns out to be around 2000. For compromising this making the transistor to go in linear region will reduce the W/L drastically to around 100 but increase the gain of the error amplifier. So which one is a better design, use larger transistor or use the FET in linear region. Will i get any performance degradation if i use the FET in triode region? |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |