The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Simulators >> Circuit Simulators >> preferred directory structure in Spectre
https://designers-guide.org/forum/YaBB.pl?num=1170699335

Message started by makelo on Feb 5^th, 2007, 10:15am

Title: preferred directory structure in Spectre
Post by makelo on Feb 5^th, 2007, 10:15am

Hi,

I see many posts on this website where people edit their netlist by hand. I want to start using this level of control but it seems to me, that to make this process efficient, one should define their own directory structure that makes it convenient to access netlist files and results files without descending through 10 sub-directories. My question is: “What are some practical directory structure for netlists and results that have worked well for people” and “how are these paths defined? .cdsinit .cdsenv or .cshrc?

Here is an example of my problem:
My current path to a given netlist is:

~/jazz/project1/work_libs/lehne/cds/simulation/design_XXX/spectre/schematic/netlist

and my path to results is:
~/jazz/project1/work_libs/lehne/cds/simulation/design_XXX/spectre/schematic/psf

I would like to have something like:

~/Netlists/design_XXX/

and

~/Results/design_XXX/

Thanks,
makelo

Title: Re: preferred directory structure in Spectre
Post by makelo on Feb 6^th, 2007, 10:51am

This is an easy question. I am not really asking "How" but rather "Where and Why"

Thanks,
Makelo