The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Design >> RF Design >> BNTUB in SiGe HBTs from AMS
https://designers-guide.org/forum/YaBB.pl?num=1171489862

Message started by Ruben on Feb 14^th, 2007, 1:51pm

Title: BNTUB in SiGe HBTs from AMS
Post by Ruben on Feb 14^th, 2007, 1:51pm

Hi guys!!
MI question is the following: Does anyone knows if the BNTUB layer from a bipolar SiGe transistor should be coneccted to the ground?? If this is true, how I do?? Thanks very much.

PS: the technology used is AMS with the HIT_KIT 3.7. The software used is CADENCE.