The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Simulators >> RF Simulators >> How to access Gm or Gmb
https://designers-guide.org/forum/YaBB.pl?num=1171933534

Message started by Ed1 on Feb 19^th, 2007, 5:05pm

Title: How to access Gm or Gmb
Post by Ed1 on Feb 19^th, 2007, 5:05pm

Hi,

Can you please tell me how to access the Gm or Gmb of a transistor instantiated in the schematic of ADS so that we can plot it again Ids, width etc. ?

I don't want to create equation for Gm or Gmb.. there's a way it can be accesed because the simulator calculates it.

thanks,

Title: Re: How to access Gm or Gmb
Post by pancho_hideboo on Feb 19^th, 2007, 10:15pm

Just save operation point with brief or detail mode.
This is true for both ADS native and RFDE.

Title: Re: How to access Gm or Gmb
Post by Ed1 on Feb 20^th, 2007, 1:17am

pancho_hideboo wrote on Feb 19^th, 2007, 10:15pm:

Just save operation point with brief or detail mode.
This is true for both ADS native and RFDE.

Thanks for the reply, another way I accessed Gm by editing right on the schemetic.