The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Simulators >> AMS Simulators >> Debugging Analog Erros in Spectre-NCSIM https://designers-guide.org/forum/YaBB.pl?num=1172547120 Message started by badamsssl on Feb 26th, 2007, 7:32pm |
Title: Debugging Analog Erros in Spectre-NCSIM Post by badamsssl on Feb 26th, 2007, 7:32pm Hi I was trying to model some transistor level circuits in VHDL AMS using Cadence Spectre VHDLAMS. I have no clue in how to debug the "Error found by spectre during DC solution estimation, during IC analysis, during transient analysis `amsAnalysis'. Matrix is singular (detected at `tb_output' and `uInv.A1.irn'). ncsim:*E, RNALER: simulation terminated due to analog error" Thanks in advance. your help is awaited. |
Title: Re: Debugging Analog Erros in Spectre-NCSIM Post by Ken Kundert on Mar 27th, 2009, 11:26am Look for floating nodes, particularly `tb_output' and `uInv.A1.irn'. Once you find them, add a large value resistor from that node to ground. -Ken |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |