The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Design >> Analog Design >> How to simulate an impedance file https://designers-guide.org/forum/YaBB.pl?num=1173716654 Message started by Cri Azzolini on Mar 12th, 2007, 9:24am |
Title: How to simulate an impedance file Post by Cri Azzolini on Mar 12th, 2007, 9:24am Hi all! I would like to simulate the behaviour of an audio amplifier where the loudspeaker is described by a text file containing the load impedance (magnitude and phase). Since the load impedance behaviour shows several self-resonances, a physical model is not trivial to fit. I am wondering if Spectre can simulate a circuit including, in some manner, a file describing the frequency behaviour of the load. I guess an AC analysis can be done by means of a S-parameter model file but I am not sure about transient analysis. Did anybody of you find the same problem? Can you suggest how to simulate an impedance described by a tabular file? Many thanks in advance, bye! Cri |
Title: Re: How to simulate an impedance file Post by ACWWong on Mar 12th, 2007, 12:15pm see http://www.designers-guide.org/Forum/YaBB.pl?num=1168526769/3 cheers aw |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |