The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Measurements >> Phase Noise and Jitter Measurements >> Extracing the jitter of the phase detector https://designers-guide.org/forum/YaBB.pl?num=1175314827 Message started by Armymen on Mar 30th, 2007, 9:20pm |
Title: Extracing the jitter of the phase detector Post by Armymen on Mar 30th, 2007, 9:20pm Hi, all, I am trying to do the jitter predicting of my PLL. According to Page 30th of "Predicting the Phase Noise and Jitter of PLL-based Frequency synthesizers", I did PSS/PNoise analysis in spectraRF, I got a PSS noise summary by highlight "integrated noise". The question is : Is the "total output noise" var(n) in equation (57)? I am really lost there, any expert can give me some hints or some document to study on how to get var(n)? thanks in advance. Armymen |
Title: Re: Extracing the jitter of the phase detector Post by Armymen on Apr 10th, 2007, 9:25pm To make it clear, the question is: Is the "total output noise" from the PSS/PNoise summary equal to the var(n) in equation (57)? Thanks, |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |