The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Design >> Mixed-Signal Design >> How to carry out the test op-amp?? https://designers-guide.org/forum/YaBB.pl?num=1176713912 Message started by kim57 on Apr 16th, 2007, 1:58am |
Title: How to carry out the test op-amp?? Post by kim57 on Apr 16th, 2007, 1:58am Hello, Sorry to trouble again.. my supervisor asked me to carry out the following simulation to test an op-amp. but i have no idea how to do that.. anyone can help?? i need to do 1: DC open loop gain phase 2: Noise analysis 3: DC offset 4: DC current consumption 5: Slew rate 6: CMRR 7: PSRR for VDD and VSS thanks for helping me |
Title: Re: How to carry out the test op-amp?? Post by Andrew Beckett on Apr 16th, 2007, 3:49am Why don't you ask your supervisor, since it sounds as if you need some supervision? Andrew. |
Title: Re: How to carry out the test op-amp?? Post by sheldon on Apr 17th, 2007, 11:48pm Kim, The following links may provide some useful information, http://www.cadence.com/whitepapers/FVofDiffOpAmp_wp.pdf http://engr.smu.edu/orgs/ssc/slides/20001215b.pdf |
Title: Re: How to carry out the test op-amp?? Post by smarty on Apr 27th, 2007, 2:20am Hi Kim, Check out the following. This might be of help to you. www.mrc.uidaho.edu/mrc/people/harry/ee415/class_handouts/two_stg_char.pdf Regards, SBR |
Title: Re: How to carry out the test op-amp?? Post by loose-electron on May 23rd, 2007, 6:01pm Some good textbooks on the shelf are suggested - Start gathering books on the subject of analog IC design. Also, local university courses, or industry training seminars. (I teach this stuff, where are you at? Email me) |
Title: Re: How to carry out the test op-amp?? Post by batistuta on Jul 4th, 2007, 3:49am hi, loose-electron, i also need this mannual or information about opamp simulation,can you E-mail me?? dongff1982@163.com thanks. batistuta |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |