The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Design >> RF Design >> how to do simulation for divide by 128/129 divider https://designers-guide.org/forum/YaBB.pl?num=1177681137 Message started by Jagdish on Apr 27th, 2007, 6:38am |
Title: how to do simulation for divide by 128/129 divider Post by Jagdish on Apr 27th, 2007, 6:38am i want to simulation for divide by 128/129 counter and want to see its power spectral density how it look can any one help me on this topic i am having problem in choosing voltage source for that simulation its giving an error when i do Qpss analsis ... it saying missing fund some thing like this |
Title: Re: how to do simulation for divide by 128/129 div Post by rf_man on May 1st, 2007, 5:47am Just use PSS simulation, set the fundamental frequency as the output frequency of the divider. Check the results in spectrum domain. QPSS simulation is not needed. |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |