The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Design Languages >> Verilog-AMS >> How to make accumulator module use verilog-A? https://designers-guide.org/forum/YaBB.pl?num=1178871526 Message started by icsoul on May 11th, 2007, 1:18am |
Title: How to make accumulator module use verilog-A? Post by icsoul on May 11th, 2007, 1:18am Note: not verilog-AMS Thanks for your help!! |
Title: Re: How to make accumulator module use verilog-A? Post by makelo on May 22nd, 2007, 2:23pm You could build it up from the primitives given as examples in the modeling section. There are plenty of VerilogA and, or, nands, and dff there. This might be a good place to start. |
Title: Re: How to make accumulator module use verilog-A? Post by icsoul on May 25th, 2007, 2:38am Than you for your advice! |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |