The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Other CAD Tools >> Physical Verification, Extraction and Analysis >> Assura Exrtraction: Please re-generate cap_coeff
https://designers-guide.org/forum/YaBB.pl?num=1182159222

Message started by Faisal on Jun 18^th, 2007, 2:33am

Title: Assura Exrtraction: Please re-generate cap_coeff
Post by Faisal on Jun 18^th, 2007, 2:33am

I get a following error message from Assura Exrtraction

Run pax16 to generate capfile

Warning at "pax_16" cap_coeff.dat version 0 is out of date, needs to be 4
"FATAL" at pax16, Please re-generate cap_coeff.dat using latest capgen

Title: Re: Assura Exrtraction: Please re-generate cap_coe
Post by bernd on Jun 19^th, 2007, 1:15am

You are probably using an newer version of Assura than your
parasitic models are create with.

You have to run 'capgen', this is the tool to create parasitic models,
to re-generate them.

Have a look at the files 'RCXspiceINIT' or 'RCXdspfINIT', of your
Assura technology directory, in the last lines of these files the
capgen options of the capgen last run are indicated.

I also strongly recommend to read the chapter
'Assura RCX and Capgen Setup' from the
'Assura Physical Verification Developer Guide'
for better understanding.

Bernd

Title: Re: Assura Exrtraction: Please re-generate cap_coe
Post by Faisal on Jun 21^st, 2007, 2:59am

Thank you Bernd, This problem got solved after updating the Assura version.