The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Simulators >> AMS Simulators >> Eldo with AMS-designer https://designers-guide.org/forum/YaBB.pl?num=1185806629 Message started by Pavel on Jul 30th, 2007, 7:43am |
Title: Eldo with AMS-designer Post by Pavel on Jul 30th, 2007, 7:43am Hello Is it possible to use Eldo as analog simulator in AMS-designer? Regards. Pavel. |
Title: Re: Eldo with AMS-designer Post by Ken Kundert on Jul 30th, 2007, 11:15am No. AMS Designer combines NCsim and either Spectre or Ultrasim, all Cadence products. Mentor provides AdvanceMS, which combines Eldo and ModelSim. -Ken |
Title: Re: Eldo with AMS-designer Post by Pavel on Jul 31st, 2007, 2:23am Thanks Ken, Can AdvanceMS read Virtuoso Schematics? Regards Pavel. |
Title: Re: Eldo with AMS-designer Post by ACWWong on Jul 31st, 2007, 3:17am ADMS can plug directly into the ADE (Virtuoso) environment, but I think you'll need an Oasis license from Cadence. Oasis provides a socket for the ADMS, Eldo, EldoRF etc to plug into... although I'm not sure exactly what it does to the spectre netlists... |
Title: Re: Eldo with AMS-designer Post by Pavel on Jul 31st, 2007, 8:22am Ok, thanks. |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |