The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Other CAD Tools >> Physical Verification, Extraction and Analysis >> What are these error from LVS: psub_StampErrorMult
https://designers-guide.org/forum/YaBB.pl?num=1192560119

Message started by DoYouLinux on Oct 16^th, 2007, 11:41am

Title: What are these error from LVS: psub_StampErrorMult
Post by DoYouLinux on Oct 16^th, 2007, 11:41am

Hi all,

I tried to run LVS, but I had found the following error messages:

psub_StampErrorMult

psub_StampErrorConnect

Can they be neglected or do we need to set some thing in LVS window (I use Assura) ?

Title: Re: What are these error from LVS: psub_StampError
Post by didac on Oct 17^th, 2007, 9:06am

Hi,
Have you checked that you have contacts to the p_substrate and to the nwells?,and if you are doing a custom layout check that nwells exists around the transistors.
Hope it helps,