The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Simulators >> RF Simulators >> sweep LO
https://designers-guide.org/forum/YaBB.pl?num=1192592134

Message started by aaron_do on Oct 16^th, 2007, 8:35pm

Title: sweep LO
Post by aaron_do on Oct 16^th, 2007, 8:35pm

Hi,

i need to simulate a UWB mixer. The IF is assumed constant, and the LO needs to be swept from 3-10 GHz. How would i simulate this using spectreRF? Normally using PSS and PXF you can easily sweep the RF signal but not the LO.

thanks,
Aaron

Title: Re: sweep LO
Post by pancho_hideboo on Oct 17^th, 2007, 1:02am

Hi.

Use "Tools/Parametric_Analysis" in ADE.
Or use OCEAN script.