The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Measurements >> Phase Noise and Jitter Measurements >> phase noise >0dBc/Hz at small frequency offsets https://designers-guide.org/forum/YaBB.pl?num=1192678682 Message started by Dio on Oct 17th, 2007, 8:38pm |
Title: phase noise >0dBc/Hz at small frequency offsets Post by Dio on Oct 17th, 2007, 8:38pm Hi all, I noticed, that resulting phase noise curve I'm geting through PSS+PNoise simulation starts from positive value if small frequency offsets are used (like 10..100 Hz). One would expect it to start from 0, since it in dBc/Hz. Is it simulation accuracy (reltol) issue or something fundamental in how SpectreRF handles this type of simulations or something wrong can be with setup/circuitry? Thanks Dio |
Title: Re: phase noise >0dBc/Hz at small frequency offset Post by Frank Wiedmann on Oct 17th, 2007, 11:20pm See http://www.designers-guide.org/Forum/YaBB.pl?num=1050465395. |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |