The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Simulators >> Circuit Simulators >> plot trace in bold type
https://designers-guide.org/forum/YaBB.pl?num=1194405020

Message started by flywill on Nov 6^th, 2007, 7:10pm

Title: plot trace in bold type
Post by flywill on Nov 6^th, 2007, 7:10pm

I need to capture waveform in Cadence for design review. Each trace in the plot is defaulted in "fine" type. It will save a lot of effort if "bold" can be configured as default setting. It takes a lot of time to change each curve.
Anyone knows how to configure it?