The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Modeling >> Behavioral Models >> differential charge pump in verilog-a https://designers-guide.org/forum/YaBB.pl?num=1196939683 Message started by Maher on Dec 6th, 2007, 3:14am |
Title: differential charge pump in verilog-a Post by Maher on Dec 6th, 2007, 3:14am Hi folks, there's a verilog-a description of a single ended charge pump in the library ahdlLib in cadence. can you help me to model in verilog-a a differential charge pump connected to a filter and to 2 current source (see circuit below), one between (+phase & -phase), the second one connected between (+frequency & -frequency). R C R -----~~~~~~~-----------------------||--------------------~~~~~~~~------------ +phase +frequency -frequency -phase thank you very much Maher |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |