The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Simulators >> Circuit Simulators >> How to setup Spectre V62 (MMSIM62) for IC5141 !
https://designers-guide.org/forum/YaBB.pl?num=1197760606

Message started by cuonghpm on Dec 15^th, 2007, 3:16pm

Title: How to setup Spectre V62 (MMSIM62) for IC5141 !
Post by cuonghpm on Dec 15^th, 2007, 3:16pm

Hi All,
I am using the cadence ic5141 and now I want to use Spectre V62 (from MMSIM62) with cadence IC5141. I have already installed MMSIM62 onto the server but I don't know how to make it work with ic5141. After installing MMSIM62, I run icfb then the old spectre (5141) is still there.
Please help me.
I appreciate for your help and look forward to hearing form you.

Title: Re: How to setup Spectre V62 (MMSIM62) for IC5141
Post by Andrew Plumb on Dec 16^th, 2007, 7:17pm

Just make sure the path to MMSIM62 spectre comes before the path to IC5141 in your $PATH.

Andrew.

Title: Re: How to setup Spectre V62 (MMSIM62) for IC5141
Post by cuonghpm on Dec 21^st, 2007, 6:51pm

Thanks so much, Andrew.