The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Simulators >> Circuit Simulators >> Conversion of spectre/hspice netlist to schematic https://designers-guide.org/forum/YaBB.pl?num=1198833192 Message started by avlsi on Dec 28th, 2007, 1:13am |
Title: Conversion of spectre/hspice netlist to schematic Post by avlsi on Dec 28th, 2007, 1:13am Dear all, I have a lengthy netlist to be used in the simulation. I need to generate a schematic. So, please help to create a schematic from the netlist... Thanks in advance. AVLSI. |
Title: Re: Conversion of spectre/hspice netlist to schema Post by rajdeep on Dec 28th, 2007, 1:52am This discussion might help. I do not know about anything that creates a schematic out of a netlist though, but one can use the following hack to simulate it. http://www.designers-guide.org/Forum/YaBB.pl?num=1198763559 Rajdeep |
Title: Re: Conversion of spectre/hspice netlist to schema Post by Geoffrey_Coram on Jan 2nd, 2008, 4:47am I know there are tools that take netlists (usually CDL format) and generate schematics, but they aren't very readable -- you get the instances placed sort of on a grid, and the terminals have net flags on them, but no wires in the schematic connecting the pieces of the nets. In the main icfb window, File > Import > , see what options you've got. |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |