The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Design Languages >> Verilog-AMS >> no connection module found!!
https://designers-guide.org/forum/YaBB.pl?num=1200488638

Message started by shirin_br on Jan 16^th, 2008, 5:03am

Title: no connection module found!!
Post by shirin_br on Jan 16^th, 2008, 5:03am

Hello,

I am making a behavioural model of my bandgap circuit in Verilog-AMS. There are some digital pins in my schematic which are connected to dc voltage sources in test bench.
The problem occures when I want to simulate the circuit using hierarchy editor of Cadence. I am given error for all the digital pins as:
"No connection module found:Need an input port of continuous discipline electrical, and an output port of discrete discipline logic".

Would you please guide me how I can define this discipline and connect these two?

Thank you so much.

Title: Re: no connection module found!!
Post by rajdeep on Jan 16^th, 2008, 6:16am

What simulator you are using? You have to use AMS Designer.
I'm attaching a pdf that I found useful. This should help you. It
has all the steps well illustrated.