The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Simulators >> RF Simulators >> Divider SSB phase noise https://designers-guide.org/forum/YaBB.pl?num=1200926288 Message started by kevinm on Jan 21st, 2008, 6:38am |
Title: Divider SSB phase noise Post by kevinm on Jan 21st, 2008, 6:38am Hi, I've a question about simulating divider phase noise: After running a pnoise analysis (noise type =jitter) I can plot the noise voltage PSD at the threshold crossing time pow(getData("out" ?result "pnoise_pmjitter") 2) Is this SSB noise? Or do I need to divide this noise by a factor of 2 before I can calculate the divider's SSB phase noise using equations (1) and (5) in the doc "Simulating the Phase noise Contribution of the divider in a phase lock loop" thanks for your help, Kevin. |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |