The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Measurements >> Phase Noise and Jitter Measurements >> Questions on Ken's PLLjitter.pdf https://designers-guide.org/forum/YaBB.pl?num=1209048069 Message started by weber8722 on Apr 24th, 2008, 7:41am |
Title: Questions on Ken's PLLjitter.pdf Post by weber8722 on Apr 24th, 2008, 7:41am Hi, I read the great paper, but wonder a bit on p.45 showing the Matlab script for phase-noise vs f. Basically you need to do a psd calculation on the cumulated phase, which is in the example basically a huge vector (2GHz * 60ms), starting with something like 0,6.28...,12.5....,.... However, why the psd takes only 512 samples from this huge vector? The maximum frequency should be 1/60ms*512 = 8.5kHz, which does not fit to the graphs. A second also important question, does anybody has this in SKILL for Cadence ADE calculator - or just directly the calculator expression? Bye Stephan |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |