The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Design >> Analog Design >> High frequency switch - 2N4391 https://designers-guide.org/forum/YaBB.pl?num=1209195670 Message started by liveavr on Apr 26th, 2008, 12:41am |
Title: High frequency switch - 2N4391 Post by liveavr on Apr 26th, 2008, 12:41am This circuit uses a 2N4391 JFET to create a high frequency switch. The 2N4391 JFET provides a low on-resistance of 30 ohms and a high off-impedence (<0.2pF) when off. Other specs are: attenuation > 80dB @ 100MHz and insertion loss approximately 6dB. With proper layout and an "ideal" switch, the performance stated above can be readily achieved. |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |