The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Design >> RF Design >> Gm cell needed https://designers-guide.org/forum/YaBB.pl?num=1212129209 Message started by noppp on May 29th, 2008, 11:33pm |
Title: Gm cell needed Post by noppp on May 29th, 2008, 11:33pm Hi every one I really need a Gm cell design this cell is used to convert RF voltage to RF current (Charge) Please help me urgently :'( thanks in advance :-[ |
Title: Re: Gm cell needed Post by Zero on May 30th, 2008, 4:21am I'm not sure if this could work with your application, but why didn't you consider the simple diff-pair? |
Title: Re: Gm cell needed Post by buddypoor on May 30th, 2008, 6:39am Each version of a voltage controlled current source (which is able to handle your frequency) should do the job; what about a commercial OTA ? |
Title: Re: Gm cell needed Post by noppp on Jun 1st, 2008, 7:21pm Thanks for reply but what I need is in this fig. Thanks in advance |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |