The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Simulators >> Circuit Simulators >> spice netlist (import) simulated from Cadence GUI? https://designers-guide.org/forum/YaBB.pl?num=1218063077 Message started by wave on Aug 6th, 2008, 3:51pm |
Title: spice netlist (import) simulated from Cadence GUI? Post by wave on Aug 6th, 2008, 3:51pm Hello - I'm working on a project we're trying to migrate all netlists into a cadence schematic, and use the favorite old GUI such as the Analog Design Environment (ADE). In the mean time, I have IP blocks with spice netlists only. Question: inside a Cadence schematic, can I instantiate a symbol that references such a netlist, and run spectre (spice format)? If so, exactly, how do I do this? thanks! the Wave 8-) |
Title: Re: spice netlist (import) simulated from Cadence GUI? Post by bernd on Aug 7th, 2008, 1:45am There was a similar post a few days ago maybe this helps. http://www.designers-guide.org/Forum/YaBB.pl?num=1191334088 * |
Title: Re: spice netlist (import) simulated from Cadence GUI? Post by bernd on Aug 7th, 2008, 1:45am There was a similar post a few days ago maybe this helps. http://www.designers-guide.org/Forum/YaBB.pl?num=1191334088 * |
Title: Re: spice netlist (import) simulated from Cadence GUI? Post by wave on Aug 7th, 2008, 3:59pm Hi Bernd - thanks. I got the scasubckt symbol to work. Seems fine. Now, the office discussion is, why is that necessary? Can we use a normal symbol and create a netlist view, that contains the same file.sp cheers Wave 8-) |
Title: Re: spice netlist (import) simulated from Cadence GUI? Post by bernd on Aug 8th, 2008, 2:15am No it is not necessay, but it's probably the easiest way to do it. You can use your own symbol as well, but you need in addition.
* |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |