The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Simulators >> Circuit Simulators >> Newton: No convergence at time . .. transient convergence help https://designers-guide.org/forum/YaBB.pl?num=1219794530 Message started by jiesteve on Aug 26th, 2008, 4:48pm |
Title: Newton: No convergence at time . .. transient convergence help Post by jiesteve on Aug 26th, 2008, 4:48pm Anybody have any suggestions for the following non-convergence errors? It only appears to be happening at certain corners at 100C. Node X is a high-impedence node (floating). I am running eldo and have tried playing around with the TUNING setting. Seems to work at STANDARD accuracy but I need higher accuracy. Any suggestions appreciated. ---- Newton: No convergence at time :0.259943Nano ; try to pass over... pb on or around node X TIME 2.609432e-10: end of non-convergence points Newton: No convergence at time :0.263943Nano ; try to pass over... pb on or around node Y TIME 2.649432e-10: end of non-convergence points Newton: No convergence at time :0.269943Nano ; try to pass over... pb on or around node X |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |