The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Simulators >> Circuit Simulators >> Error using spectre https://designers-guide.org/forum/YaBB.pl?num=1220208219 Message started by aidnaal on Aug 31st, 2008, 11:43am |
Title: Error using spectre Post by aidnaal on Aug 31st, 2008, 11:43am Dear All, When I want to start simulation with spectre the error says: Fatal error: Illegal library definition found in netlist I set the model file correctly, but I don't know why it errors! Thanks. |
Title: Re: Error using spectre Post by K.Riad on Aug 31st, 2008, 3:48pm Hi, This error occurs most likely because your spectre model file contains many sections. You need to tell to spectre which section it has to include. I guess your netlist contains : include "<YOUR_MODEL_PATH>/spectreModelFile.scs" but it should be like include "<YOUR_MODEL_PATH>/spectreModelFile.scs" section=TYP if you want to simulate the TYP corner (or typical, SLOW, FAST ....) If your using the ADE GUI to make you netlist, then go to: ADE -> Setup -> Model Libraries. Click or select the model you want to include and fill the 'section (opt)' field to choose which section you want to include. Cheers ;) Riad. |
Title: Re: Error using spectre Post by ywguo on Sep 2nd, 2008, 2:46am Hi adnaal, If you present more details like the netlist, the log file, and so on, you probably get more helpful suggestion. Yawei |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |