The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Simulators >> Circuit Simulators >> How i can simulate s-parameters in a differential filter https://designers-guide.org/forum/YaBB.pl?num=1222471363 Message started by davcordova on Sep 26th, 2008, 4:22pm |
Title: How i can simulate s-parameters in a differential filter Post by davcordova on Sep 26th, 2008, 4:22pm HI i'm having problems trying to simulate the sp paramaters of a filter. I was searching and i found that the simulations is usign a balun i don't know very well how to put it in my schematic. I have the differential filter with the positive and negative input and output signals. I'm usign cadence for the simulation and the only balun i found is an ideal but does not work for me because it's just the symbol and i do not have the spice model to use it. Can anyone give a hand with this. David |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |