The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Other CAD Tools >> Physical Verification, Extraction and Analysis >> Assur extraction problem https://designers-guide.org/forum/YaBB.pl?num=1224170402 Message started by wccheng on Oct 16th, 2008, 8:20am |
Title: Assur extraction problem Post by wccheng on Oct 16th, 2008, 8:20am Dear all, I am using Assur to do extraction. However, there is a problem of this. I hope anyone could help me. My case is as follow: I have one transistor with 4 fingers in schematic view; I have drawn one transistor with 4 fingers also; DRC and LVS are pass; Then, I do extraction, such as Ronly, Conly or RC. It could not give out 4 fingers extracted view. It maps this 4 to magnification factor. I don't know why will it happen. I have done this few days before. It still gives out correct extracted view. If I use lvs-extracted, it could still give out the correct 4 fingers extracted view. Could anyone teach me the fixing method? Thanks wccheng |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |