The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Measurements >> Phase Noise and Jitter Measurements >> Jitter Meaurement https://designers-guide.org/forum/YaBB.pl?num=1224508920 Message started by nishant22 on Oct 20th, 2008, 6:21am |
Title: Jitter Meaurement Post by nishant22 on Oct 20th, 2008, 6:21am Hi, Can anyone help me, for I am writing a verilog A model where I want to measure the jitter from the supply itself(VDDA in my case). Therefore what I need is to measure is the Vrms and Vaverage, then I will need to get an equation which would depend on these two components. Does anyone have the code for the same? I have to keep in mind that the Vaverage and Vrms should be preferably be measured for one clock period for if I need a right output from the equation, I need those two to be calculated at some interval rather than always. I don not want to declare jitter as constant but it should vary accoding yo noise in the supply. Thanks in advance if anyone can help me out. nIshant |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |