The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Design >> Analog Design >> model parameter of nmos drain to substrate leakage current ?
https://designers-guide.org/forum/YaBB.pl?num=1228135113

Message started by chungming on Dec 1^st, 2008, 4:38am

Title: model parameter of nmos drain to substrate leakage current ?
Post by chungming on Dec 1^st, 2008, 4:38am

Hi ~
Is any one know the parameter of nmos drain to sub reverse current (or say pn junction leakage current) in spice level 49 model ?
Thanks ~ !

Title: Re: model parameter of nmos drain to substrate leakage current ?
Post by loose-electron on Dec 5^th, 2008, 1:21pm

Suggest:

Do a little RTFM here. Level 49 - go to your simulator manual and find out which model this is. (For example BSIM3v2, or whatever it is) - Go find the web site for the model. (UC Berkley has all the BSIM's and there are web sites for pretty much all model developments, EKV, etc, etc.)

Then go read the model definition for the paramaters and how they are representated in the model. It's out there yiu just got to go digging for it.

Jerry