The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Simulators >> RF Simulators >> Efficient way to convert s-param model of transformers to lumped circuit https://designers-guide.org/forum/YaBB.pl?num=1229554930 Message started by schehrazi on Dec 17th, 2008, 3:02pm |
Title: Efficient way to convert s-param model of transformers to lumped circuit Post by schehrazi on Dec 17th, 2008, 3:02pm Hi All, There are a few softwares that give out lumped models for s-parameters of an inductor over a range of frequencies. Do you know of a way to do the same thing for a transformer? Thank you. |
Title: Re: Efficient way to convert s-param model of transformers to lumped circuit Post by jbdavid on Dec 18th, 2008, 8:00pm Run Spectre "sp" analysis? |
Title: Re: Efficient way to convert s-param model of transformers to lumped circuit Post by pancho_hideboo on Dec 19th, 2008, 12:10am schehrazi wrote on Dec 17th, 2008, 3:02pm:
Create equivalent model of target transformer and determine parameters by using optimizer with SP-analysis in Agilent ADS. Or use Broadband SPICE Model Generator in Agilent ADS. I recommend to use former method. |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |