The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Simulators >> Circuit Simulators >> Multiple Y-axises in Cadence Wavescan https://designers-guide.org/forum/YaBB.pl?num=1230288903 Message started by pancho_hideboo on Dec 26th, 2008, 2:55am |
Title: Multiple Y-axises in Cadence Wavescan Post by pancho_hideboo on Dec 26th, 2008, 2:55am Any expert of Cadence tools. I have question about Cadence Wavescan in ADE. In Cadence AWD, I can use four Y-axies. But in Cadence Wavescan, I can't find any menu for activating multiple Y-axises. Here my question is how to set multiple Y-axises in Cadence Wavescan. A function of multiple Y-axises itself is not available in Cadence Wavescan ? Any expert of Cadence tools, teach me. |
Title: Re: Multiple Y-axises in Cadence Wavescan Post by sheldon on Dec 27th, 2008, 3:11am Pancho, Try selecting a waveform and then selecting the following in from the pull-down menu. Trace --> Assign to Axis --> New Axis Best Regards, Sheldon |
Title: Re: Multiple Y-axises in Cadence Wavescan Post by simon2 on Feb 22nd, 2011, 6:45am Any idea how to do the same with an Ocean script or SKILL function? - specifically I need to do the equivalent of a "awdMoveTrace2ToY2axis" function which does not exist (or at least not in the versions of the manuals I have). |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |