The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Simulators >> Circuit Simulators >> How to see the node transient current https://designers-guide.org/forum/YaBB.pl?num=1230632765 Message started by sch on Dec 30th, 2008, 2:26am |
Title: How to see the node transient current Post by sch on Dec 30th, 2008, 2:26am Did anyone know how to see the node transient current in tran simulation with Spectre. |
Title: Re: How to see the node transient current Post by Rooney on Dec 30th, 2008, 9:39pm Hi, If you are running with ADE, then go to Outputs --> to be plotted --> select on the schematic. Then bring youe design in the schematic view and click on the node for which you want to see the transient current. You can cross check it the outputs window of your ADE window. Hope this will work out |
Title: Re: How to see the node transient current Post by Andrew Beckett on Jan 2nd, 2009, 7:38am And if running from the command line use the spectre "save" statement (see "spectre -h save" for more details). Regards, Andrew. |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |