The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Simulators >> Circuit Simulators >> Cadence IC5141 editor problems https://designers-guide.org/forum/YaBB.pl?num=1232982319 Message started by JanB on Jan 26th, 2009, 7:05am |
Title: Cadence IC5141 editor problems Post by JanB on Jan 26th, 2009, 7:05am Hi I am pretty new to Cadence Administration. We have encountered the following problems to which I found no suited solution yet. Everytime I click right on any view in the Cadence Library Manager the Library Manager crashes with the following error message: X Error of failed request BadWindow (invalid window parameter) Major opcode of failed request: 38 (X_QueryPointer) Resource id in failed request: 0x25 Serial number of failed request: 83739 Current serial number in output stream: 83739 It is posible to open any view by double clicking onto it but then it opens in read-only mode (not a big problem cause you can make it editable by clicking on Design - Make editable or press control + O). But now we want to use Verilog-A views and if you open them by doubleclicking they are read-only and there is no way to make them editable. Open the Verilog-A views with control + O gives the following error message: WARNING editFile: X Error of failed request: BadAtom (invalid Atom parameter) Major opcode of failed request: 20 (X_GetProperty) Atom id in failed request 0x48 Serial number of failde request 20 Current serial number in output stream: 20 No clue... I have attached the CDS.log file as a .pdf. There are some warnings and some errors (maybe helpful...) I am grateful for any help. Thanks in advance Jan |
Title: Re: Cadence IC5141 editor problems Post by bernd on Jan 27th, 2009, 2:10am This sounds to me like an issue with your OS and Cadence IC. Some suggestion. 1. Contact you Cadence customer support because this is really hard to debug through a forum like this. 2. Cadence offers a tool which checks your OS and patches for the correct prerequisites for your Cadence installation try it. http://sourcelink.cadence.com/docs/files/download/sys_conf_check/ 3. Try to set the UNIX environment variable csh: setenv DD_DONT_DO_OS_LOCKS se The are some SKILL function which are loaded twice through your setup function <BlaBal> redefined also Cadence environment variables s form a different tool version which now are not found any more *WARNING* envSetVal: Can't set the value of variable 'BlaBla', in tool[.partition] 'schematic' - it has not been registered. explore where this things are coming from and try to ge rid of theses. * |
Title: Re: Cadence IC5141 editor problems Post by bernd on Jan 27th, 2009, 2:12am Should be setenv DD_DONT_DO_OS_LOCKS set * |
Title: Re: Cadence IC5141 editor problems Post by Andrew Beckett on Jan 27th, 2009, 12:54pm I just answered this question on http://groups.google.com/group/comp.cad.cadence/browse_thread/thread/4355e10fd123d6be# Andrew. |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |