The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Simulators >> AMS Simulators >> Spice sub-circuit in AMS simulation https://designers-guide.org/forum/YaBB.pl?num=1238609996 Message started by R. Zakai on Apr 1st, 2009, 11:19am |
Title: Spice sub-circuit in AMS simulation Post by R. Zakai on Apr 1st, 2009, 11:19am Hello, I have a spice sub circuit netlist which I normally simulate in Spectre by using spectre view and linking it to spice subcircuit using the model property. Now I am trying to set it up in an AMS (MMSIM62) test bench. The same method does not seem to work. AMS fails to elaborate that particular block. I have included the model path in hdl.var file but it does not make a difference. Can anyone provide some guidance? Thanks in advance. Rehan |
Title: Re: Spice sub-circuit in AMS simulation Post by Andrew Beckett on Apr 4th, 2009, 2:37pm You've not really given enough details to work on - this should work. I don't know what version of AMS you're actually using (AMS is not in the MMSIM stream) - just in case it makes a difference... So it's a little hard to be much help - you might want to give some details, particularly as to how it fails, but also detailing what you've done. Regards, Andrew. |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |