The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Other CAD Tools >> Entry Tools >> Problems with simulating using technology library in ic5141 https://designers-guide.org/forum/YaBB.pl?num=1241943580 Message started by andrew_wee on May 10th, 2009, 1:19am |
Title: Problems with simulating using technology library in ic5141 Post by andrew_wee on May 10th, 2009, 1:19am Recently,i add a technology library to cadence. i define the path of the library in the cds.lib and the cds.lib was located where i start icfb. Is there anything wrong with that way? But when i use the device in the library to edit the schematic, then there is something wrong with simulating. More over,i can't modify the model name of the device in the technology library. Anyway, i use the device in the analoglib,and then use the model in the technology library. But i want to use the device of the technology library. How??? Please help me. |
Title: Re: Problems with simulating using technology library in ic5141 Post by pancho_hideboo on May 12th, 2009, 8:53pm Your questions have no relation to "RF Simulator" at all. andrew_wee wrote on May 10th, 2009, 1:19am:
andrew_wee wrote on May 10th, 2009, 1:19am:
andrew_wee wrote on May 10th, 2009, 1:19am:
|
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |