The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Simulators >> Circuit Simulators >> how to get the frequency variable https://designers-guide.org/forum/YaBB.pl?num=1246403791 Message started by .matteo on Jun 30th, 2009, 4:16pm |
Title: how to get the frequency variable Post by .matteo on Jun 30th, 2009, 4:16pm Hi everybody, I am simulating the time delay of a feedback path and I would like to plot 'phaserad(mycurrent)/(2*pi*frequency) in order to have a plot of the time delay as a function of the frequency. The problem is that when write "freq" and try to plot it I get an error of unbounded variable. Does anybody know how to get the frequency variable from an AC simulation? Thank you very much -Matteo |
Title: Re: how to get the frequency variable Post by .matteo on Jun 30th, 2009, 4:48pm I use Spectre on Virtuoso Analog Design Environment (ADE L) |
Title: Re: how to get the frequency variable Post by pancho_hideboo on Jun 30th, 2009, 4:55pm .matteo wrote on Jun 30th, 2009, 4:16pm:
There are many simulators which have AC analysis. And there are many data format as output from simulator. http://www.synopsys.com/Tools/Verification/AMSVerification/DesignAnalysis/Documents/waveview_analyzer_ds.pdf http://www.designers-guide.org/Forum/YaBB.pl?num=1196459940/1#1 http://www.designers-guide.org/Forum/YaBB.pl?num=1106643861/1#1 http://www.designers-guide.org/Forum/YaBB.pl?num=1205240723/9#9 |
Title: Re: how to get the frequency variable Post by .matteo on Jun 30th, 2009, 5:06pm Thanks a lot, the function xval() is exactly what I wasl looking for! -Matteo |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |