The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Design Languages >> Verilog-AMS >> convert rflib osc cell to VerilogA https://designers-guide.org/forum/YaBB.pl?num=1248855927 Message started by Ian on Jul 29th, 2009, 1:25am |
Title: convert rflib osc cell to VerilogA Post by Ian on Jul 29th, 2009, 1:25am Dear All, The oscillator in rflib (i.e., 'osc' cell) is implemented in SpectreHDL, and it's not supported by the latest MMSIM. I'm now trying to convert it into VerilogA, and need your help in doing this. My first question here is what's the equivalent of "node [V, I] out;" in VerilogA? Thanks. Best Regards, Ian |
Title: Re: convert rflib osc cell to VerilogA Post by Andrew Beckett on Jul 30th, 2009, 5:18am A VerilogA version of "osc" is included in IC5141 from IC5141 USR5 onwards. It's also in all IC61 versions. I won't post it here (I'm not allowed to, as it's part of the Cadence software), but if you use a recent enough version you'll be able to get it yourself. The answer to your "first question" is: electrical out; Regards, Andrew. |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |