The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Other CAD Tools >> Physical Verification, Extraction and Analysis >> parasitic in Assura RCX..
https://designers-guide.org/forum/YaBB.pl?num=1248952039

Message started by deepak on Jul 30^th, 2009, 4:07am

Title: parasitic in Assura RCX..
Post by deepak on Jul 30^th, 2009, 4:07am

for the same circuit extraction was done in calibre.... now wehn I did same extraction wiht assura,it is showing large parasitic resistance. for few nets.........

any idea????

rl1482 ( dvss12\#15991 dvss12\#15386 ) resistor r=999999995904.0000

rl1492 ( dvss12\#15305 dvss12\#16867 ) resistor r=999999995904.0000
.?????

Title: Re: parasitic in Assura RCX..
Post by Andrew Beckett on Jul 30^th, 2009, 5:29am

You need to press the "don't give me the wrong answer" button on the form.

OK, I'm being facetious. Realistically this is either that there's a bug in the version you're using (I've not seen this before though), or more likely there is something wrong with the technology files.

Since you can't give all the information in a public forum like this, I'd suggest you contact Cadence Customer Support (via sourcelink.cadence.com say) and they can help you look into why the problem occurs.

Regards,

Andrew.

Title: Re: parasitic in Assura RCX..
Post by deepak on Aug 2^nd, 2009, 9:24pm

You need to press the "don't give me the wrong answer" button on the form..??

I cant find any such buton...... in the extraction... where exactly is it??....

by d way I am using assure verification tool....5141..cadence....

Title: Re: parasitic in Assura RCX..
Post by Andrew Beckett on Aug 15^th, 2009, 7:03am

The button you're looking for is just next to the "I was only kidding" button.

Andrew.