The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Design >> RF Design >> Schottky won't work
https://designers-guide.org/forum/YaBB.pl?num=1250683909

Message started by kataria0 on Aug 19^th, 2009, 5:11am

Title: Schottky won't work
Post by kataria0 on Aug 19^th, 2009, 5:11am

I am trying to understand the usage of Schottkys. So based on some example I set up a basic experiment in spice. I was wondering if anyone could feedback on my confusion. I was hoping to observe square and linear law characteristics but I observed neither.
Please see the attached summary in excel with a simple schematic diagram. I didn't fill up the entire excel sheet because I think I was getting garbage already.
Thanks

Title: Re: Schottky won't work
Post by kataria0 on Aug 20^th, 2009, 7:14am

Hope the attachment goes through this time

Title: Re: Schottky won't work
Post by loose-electron on Sep 8^th, 2009, 8:59pm

AC analysis is small signal. Not going to work here. Try looking at DC sweeps or transient analysis.