The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Simulators >> Circuit Simulators >> Save time starting from the end of an old simulation https://designers-guide.org/forum/YaBB.pl?num=1253189872 Message started by MarcoC on Sep 17th, 2009, 5:17am |
Title: Save time starting from the end of an old simulation Post by MarcoC on Sep 17th, 2009, 5:17am Hi everybody, I have a pressing problem. I've just done a transient simulation of about 120us using Virtuoso Analog Design Environmet and it taked about 3 hours. Unfortunately the results are not stable :'( , I would simulate other 100us, I mean I have to restart a new simulation of 250us instead 120us. But this will take too much time. Is there any way to start the simulation from 120us daving my time? :-/ Thank you for uoyr help |
Title: Re: Save time starting from the end of an old simulation Post by MarcoC on Sep 17th, 2009, 7:18am Hi guys, don't matter. I've solved my problem asking more time to my project manager ::). For the moderator: if you wish you can delete this topic. Sorry for these stupid posts but I was in panic. :P Bye |
Title: Re: Save time starting from the end of an old simulation Post by ywguo on Sep 17th, 2009, 10:30pm Hi MarcoC, It's good news to have more time. :) Please go to http://www.designers-guide.org/Forum/YaBB.pl?num=1217396043/3#3 and http://www.designers-guide.org/Forum/YaBB.pl?num=1186585475/2#2 Best Regards, Yawei |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |